Objectified Process Blog



Process Blog: Polaroid OneStep Camera

        After watching Objectified, I was inspired to recreate my OneStep camera as a 3D model. This is because near the end of the film (1:13:30-1:14:10) a designer talked about objects that are important to us and I was immediately reminded of this camera. I take it with me everywhere, and it has captured some of my favourite moments in life. I will include both photos of my camera and the model. The most difficult part of creating this object was all the angles involved in making the outer casing, but these were important in achieving its iconic silhouette.








WIP

Comments

Post a Comment

Popular posts from this blog

Papercraft: Prototype Craft & Edits

Image
 Papercraft: Prototype & Edits     The first prototype of the small chicken box was difficult to create due to its size, but I believe the choice of paper also contributed to this difficulty. The nest was a much thicker material and the glue stick did not hold so various other glues were used and the overall result was not as neat as I would have liked. The chicken however was a success and turned out very well. I noticed that the thinner paper and hole in the bottom allowed me to easier manipulate the piece. For this reason, I will choose a thinner paper and add a hole to the bottom of the nest. I also noticed some errors in my template and that need to be corrected and I will add side by side comparisons of my fixes in my next blog.
Read more

Papercraft: Prototype Model

Image
 Papercraft: First Prototype      The chicken will fit inside the nest and be removable. This forms a tiny functional box using the nest as a base and chicken as a lid. The contact areas of the base and lid are parallel and similar dimensions, and the bottom of the chicken has a large hole to allow the inside to be used as storage.       The chicken has a detail that will be cut out separately which is its comb and wattles. This is a 2D piece that will fit through two slits above and below the head of the chicken and secured internally via tabs (tabs labeled with an "X"). Nest ready for printing: Chicken and accessories ready for printing:
Read more

3D Printed Hollow Form Object

Image
 3D Printed Hollow Form Object      When creating my five designs I was mostly just experimenting and not focusing on printability. At some point I had the idea using them for a night light. My final print does actually serve this purpose. The print quality ended up doing extremely well in the mid section of the design but was significantly rough around steeper parts of the top and bottom of the design. 5 design concepts: Left to right numbered 1-5 Function: Objects 2, 3, and 4, are purely for aesthetics and have no other purpose. Object 1 and 5 can be used as a night light I intend to make eventually. Form: Objects 1 and 2 are pretty basic and boring. 4 is also basic but slightly more interesting. I believe objects 3 and 5 are the most aethetically pleasing. Self-supporting: Objects 1 and 5 would print without support material. The horizontal circle in object 2, top and bottom circular curves in object 3, and hanging edges of object 4 would need support material to...
Read more